High Density Cellular Rubber Carpet Cushion

Our FIRMEST cushion profile.  Deflection under load is minimal. Best for woven, berber, and finer quality carpets.  For commercial use consult, Tred-MOR® Series only.

Firm, yet luxurious with good support for all types of residential carpet including berber.

Soft and luxurious for residential and hospitality sleeping areas.

Only Rubber Carpet Cushion Meets These Tough Requirements.

  • Extends Carpet Life - Cushion reduces carpet pile crush, helps all grades of carpet to look and perform better resulting in longer useful life.  
  • Comfortable to walk, work and live on - Orthopedically proven to significantly absorb the shock of walking.
  • Install On Any Grade - Can be installed above or below grade over any sub-floor. Also helps to mask floor imperfection.
  • Easy to Maintain - Dirt will not penetrate protective skin and become trapped inside cushion.  Vacuum and steam cleaning efficiency is greatly increased.
  • Sound Absorption Qualities - Improves Noise Reduction Efficiency (NRC); Impact Noise Rating (INR) and Impact Insulation Class (IIC) rating when compared to carpet without cushion.
  • Resists Moisture Penetration - Will not promote the growth of mildew or mold.  If flooded, dry off and continue to use.
  • Toxicity Tested - Test conducted using University of Pittsburgh protocol indicate that rubber cushion is no more hazardous than wood.
  • Flammability Tested -Meets local and national flame spread and smoke density requirements.
  • Consistent Quality Controlled Products - Eliminates high/low areas, hard spots and lumpiness caused by cushions manufactured from scrap materials.
  • Radiant Heated Floors - Preferred by the manufacturers of radiant heated floors. The high density synthetic rubber provides the lowest R-values and is not sensitive to the increased heat levels.

- - - - -